Pages

Friday, August 19, 2011

Nerf Vortex Praxis - Internals Guide!

This guide will serve as a reference for the internals of the Nerf Vortex Praxis.

For a detailed review of the Nerf Vortex Praxis, click Here.

Nerf Vortex Praxis - Casing Disassembled




Nerf Vortex Praxis - Internals Layout




Nerf Vortex Praxis - Internals Layout Close Up




Nerf Vortex Praxis - Disc Launcher Mechanism


.

20 comments:

  1. The internals look fabulously complicated. While Vortex guns may have better range and accuracy, I think N-Strike guns for the most part will be more appealing for modding.

    ReplyDelete
    Replies
    1. I took this thing apart for PLTW Engineering and it's super complicated bro, but I did manage to find the main parts that make the gun work (only 3), the rest of the plastic is just for no reason.

      Delete
  2. I can't wait for internals and voltage-mod-testfires for the Nitron. I am planning on doing an SS Tornado Strike integration with it and want so see if it's feasible and if a modded Nitron is better than a modded Stampede.

    ReplyDelete
  3. i think it is my praxis drops the clip every time i fire the gun and that is straight out of the box not very pleased will be calling nerf and complaining ASAP

    ReplyDelete
  4. jtumbry,

    I have tested many Praxis units and none exhibit that issue, so i guess you got a faulty unit... just exchange it at the store for a new working unit.

    ReplyDelete
  5. yeah, some of the guns have that problem. you can't really tell if it's going to have it, it's really just the luck of the draw

    ReplyDelete
  6. My Praxis firing range suddenly droped significantly. its current range is half what it was firing when it was new. Discs also going on left side instead of going straight. Power is also decreased. Initially its range was above 40-50 feet and now 20-30 feet.Its only 40 rounds old. Please help

    ReplyDelete
    Replies
    1. abae,

      I guess you'll have to open it up to check and see what the issue is... it could be something somehow mis-aligned, cracked or broken inside which reduced the power and/or changed the launch spin effect.

      Might be something to do with the launcher mechanism too, could be due to a faulty or weak part.

      The easier alternative is to just exchange it at the store for a new working unit (if you still have the receipt).

      Delete
    2. I have the same problem! I was wondering if you have figured out what the problem was?

      Delete
    3. If you use your gun frequently, try to let your gun rest for a day or 2. Then it will be the same like BNIB. (Brand new in box)

      Delete
  7. I opened it up and all things seem to be OK. Exchange is not possible here.
    Should i try relocating spring mod, will that help in this matter?

    ReplyDelete
    Replies
    1. abae,

      You could try that, hopefully it solves the issue at the same time.

      Delete
    2. I had the same issue as abae, and after the relocating spring mod my Praxis no longer does that.

      Delete
  8. Can you please help me ? I had a vortex praxis and it jams.I can't pull the trigger,I can't retract the magazine,And the cocking slide won't move.It stays in the middle.Can you please help me?

    ReplyDelete
    Replies
    1. Anonymous,

      I've not encountered that before, so i can't really help much.

      I guess you'll just have to open up the casing and troubleshoot the issue. Most likely something is out of place or perhaps broken.

      Delete
  9. Hey!

    I somehow managed to mess with the anti-clogging function of my blaster. In Vanilla, the blaster spring will be unloaded when you use the lever on the right hand side of the device. Any ideas how to fix that? Not crucial, but annoying, especially since I removed the safety that blocks loading the spring while empty...

    ReplyDelete
    Replies
    1. Anonymous,

      I guess you probably have to re-install the safety parts and see if it works again. :)

      Delete
  10. any cool ways to attach things or customize, cousin is coming soon and he says he has a custom so i need some help

    ReplyDelete
  11. My Praxis' trigger mechanism isn't working. It pushes the bar forward, but it doesn't push the piece, it's like it's jammed. Anyone help?

    ReplyDelete
    Replies
    1. Take it apart. Its probably the firing mechanism that is misaligned. When I took the gun apart, my group and I removed the firing mechanism and launched a whole bunch of stuff with it by itself.

      Delete