For a detailed review of the Nerf Super Soaker Point Break, click Here.
Nerf Super Soaker Point Break - Disassembled
Nerf Super Soaker Point Break - Trigger System
Friday, February 4, 2011
Nerf Super Soaker Point Break - Internals Guide!
This guide will serve as a reference for the internals of the Nerf Super Soaker Point Break.
For a detailed review of the Nerf Super Soaker Point Break, click Here.
Nerf Super Soaker Point Break - Disassembled
Nerf Super Soaker Point Break - Trigger System
For a detailed review of the Nerf Super Soaker Point Break, click Here.
Nerf Super Soaker Point Break - Disassembled
Nerf Super Soaker Point Break - Trigger System
Subscribe to:
Post Comments (Atom)
can i coupler this blaster like the hydro cannon?
ReplyDeleteHazard,
ReplyDeleteSure, it's possible to do that. Though the stock water tank and trigger are not designed to hold much pressure, so you'd have to replace those parts with a proper air tank and trigger to get foam dart firing performance out of it.
Could you fit the internals of one of the nerf pistols inside of this to get that nice revolver look?
ReplyDeleteWould it be possible to integrate a 2k into this?
DeleteAnonymous,
DeleteYes, its possible, there is enough space in the casing to fit an AT2K tank.
Benjamin,
ReplyDeleteIt's possible, just needs some custom work to get the parts to fit in and work properly.
Using this as a shell is about the only useful thing that could be done with it anyway. (It may be moddable to actually shoot water decently, but that'll take a lot of work if it can even be made to fit in the casing.) The pinch valve was made obsolete nearly 20 years ago, just as the motor-powered squirt gun was made obsolete when air pressure was introduced.
ReplyDeleteis the point break better or hydro fury im confused
ReplyDeleteim gonna get that as my side arm and the scatter blast for my primary this summer!
ReplyDeletecan u turn this gun into a regular dart shooting nerf gun/
ReplyDeleteviyer,
ReplyDeleteI guess its possible, you'd just need to connect the water tank to a barrel and try it out.
Is it possible to fit the Recon's internals in the Point Break? It's just that I hate the priming handle on the Recon.
ReplyDeleteAnonymous,
DeleteIt's too small to fit the Recon internals, you'll have to use a much larger blaster. It'll require quite a lot of moddiing work though.
Imho, it'll be much easier just to get a Raider or Alpha Trooper instead. :)
as I can do to have more water capacity?
ReplyDeletecould you modify it so that it uses the pressureto shoot bullets like a vulcan?
ReplyDeletemathias echavarria,
DeleteIts possible, just glue a plastic or PVC barrel which fits foam darts to the front, pump it up and then fire it.
The only issue is it will take alot of pumps to fill up the tank with air and the pressure isn't high so the power of the shot would be relatively low (compared to the amount of effort to pump it up).